39
_____________________________________________________________________
4.3 Setting Items
______________________________________________________________
In variable recording-length
mode, the symbol "#" is
displayed before the
recording length.
Flashing cursor
Procedure 2 Variable recording length mode
1. Press the
SET
button to display the Status Screen.
2. Move the flashing cursor to
Shot
.
3. Press the
button to set for variable recording length.
4. Using the
cursor buttons, move the flashing cursor to
the digit to be set and use the
buttons to make a
setting.
To return to the constant recording length mode, press the
button again.
To Next Page
Loading...
