Hioki RM3542 - Page 183

Chapter 10 Specifications
177
10
(2) Measurement Time (default settings)
Environment and Safety Specifications
Low Power OFF
Low Power ON
Range FAST MED SLOW
100m 3.8 ms 13 ms
43 ms
36 ms
1000m 2.0 ms 6.4 ms
41 ms
35 ms
10 1.6 ms 6.0 ms
41 ms
34 ms
100 0.9 ms 3.6 ms
21 ms
17 ms
1000 0.9 ms 3.6 ms
21 ms
17 ms
10k 1.0 ms 3.6 ms
21 ms
17 ms
100k 1.3 ms 3.8 ms
21 ms
18 ms
1000k 2.5 ms 6.0 ms
21 ms
18 ms
10M 5.3 ms
23 ms
20 ms
23 ms
20 ms
100M
26 ms
22 ms
46 ms
39 ms
86 ms
72 ms
Upper value: 50Hz power line frequency
Lower value: 60Hz power line frequency
Tolerance ±10%
±0.2 ms
(Without retry)
Range FAST MED SLOW
1000m 2.5 ms 12 ms
42 ms
35 ms
10 2.5 ms 12 ms
42 ms
35 ms
100 1.7 ms 6.1 ms
41 ms
34 ms
1000 7.2 ms 12 ms
47 ms
40 ms
Upper value: 50Hz power line frequency
Lower value: 60Hz power line frequency
Tolerance ±10%
±0.2 ms
(Without retry)
Operating environment Indoors, Pollution degree 2, up to 2000 m (6562-ft.) ASL
Storage temperature and
humidity
-10°C to 50°C (14 to 122°F), 80%RH or less (non-condensating)
Operating temperature and
humidity
0°C to 40°C (32 to 104°F), 80%RH or less (non-condensating)
Dielectric strength 1.69kV AC for 15s, Cutoff current 10 mA, between all power terminals and protective
ground, interfaces, and measurement jacks
Applicable Standards
Safety
EMC
EN61010
EN61326 Class A
EN61000-3-2
EN61000-3-3
Effect of radiated radio-frequency electromagnetic field: 3%f.s. at 10V/m
Effect of conducted radio-frequency electromagnetic field: 2%f.s. at 3 V