Hioki ST5520-01 - Page 135

127
Command Reference
Command list
Classication Command Function
Specialized
command
*CLS
Clears event resister p. 129
*ESR?
Queries event status resister p. 129
*IDN?
Queries equipment ID p. 130
*RST
Resets equipment p. 130
Testing status
:STARt
Starts a test p. 130
:STOP
Ends a test p. 130
:STATe?
Queries testing status p. 131
Measurement result
:MEASure?
Queries measured value p. 131
:MEASure:COMParator?
Queries judgment result p. 132
:MEASure:RESult?
Queries measured value and
judgment result
p. 132
:MEASure:CLEar
Clears measured value and
judgment result
p. 133
Measurement monitor
:MEASure:MONItor?
Queries the voltage monitor value p. 133
Voltage setting
:VOLTage
Sets test voltage p. 133
:VOLTage?
Queries test voltage p. 133
Resistance range
:MOHM:RANGe
Sets resistance range p. 134
:MOHM:RANGe?
Queries resistance range p. 134
Measurement speed
:SPEed
Sets measurement speed p. 134
:SPEed?
Queries measurement speed p. 134
Timer
:TIMer
Sets test duration p. 135
:TIMer?
Queries test duration p. 135
:DELay
Sets response time p. 135
:DELay?
Queries response time p. 136
Comparator
:COMParator:LIMit
Sets comparator upper/lower limit
value
p. 136
:COMParator:LIMit?
Queries comparator upper/lower
limit value
p. 136
:COMParator:MODE
Sets comparator test mode p. 137
:COMParator:MODE?
Queries comparator test mode p. 137
:COMParator:BEEPer
Sets judgment beep sound p. 137
:COMParator:BEEPer?
Queries judgment beep sound p. 137
Contact check
:CONTactcheck
Sets contact check function p. 138
:CONTactcheck?
Queries contact check function p. 138
:CONTactcheck:RESult?
Queries the contact check result p. 138
10
9
8
7
6
5
4
3
2
1
Appx. Ind.