Figure 5-83 Fixing the pass through mezzanine component
6. Tighten two screws to fix the cable connector onto the expansion blade.
Figure 5-84 Fixing the cable connector
7. Close the top cover of server blade. See Closing a top cover, Server blade
on page 5-39 section.
8. Close the top cover of storage expansion blade.
See Closing a top cover, Storage expansion blade on page 5-40 section.
9. Install the storage expansion blade.
See
Installing a storage expansion blade on page 5-12 section.
Replacing parts
5-67
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
