Hitachi Compute Blade 500 Series - Page 297

ID
Operation
category
Recording trigger Message
3834 Backing up a pair of
SSH host key.
SSH host key pair is backed up.
Channel:xxx File:xxx
3836 Restoring a pair of SSH
host key.
SSH host key pair is restored.
Channel:xxx File:xxx
3838 Creating SSL private
key and signature
certificate.
SSL private key and self signed
certificate are created. Channel:xxx
383A Creating CSR. SSL private key and certificated
signing request (CSR) are created.
Channel:xxx
383C Importing certificate. Certificate is imported. Channel:xxx
File:xxx Certificate file type:xxx
383E Copying certificate. Certificate is copied. Channel:xxx
File:xxx Certificate file type:xxx
3840 Backing up certificate. Certificate is backed up.
Channel:xxx File:xxx
3842 Restoring certificate. Certificate is restored. Channel:xxx
File:xxx
3844 Backing up
management module
settings.
Management module setting is
backed up. Channel:xxx File:xxx
3845 Restoring management
module settings.
Management module setting is
restored. Channel:xxx File:xxx
384B Changing LDAP
settings.
LDAP setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
384C Changing LDAP
settings.
LDAP setting is changed.
Channel:xxx Category:xxx
Detail:xxx
3850 Changing power saving
settings.
Power saving setting is changed.
Channel:xxx Category:xxx
Detail:xxx Value:xxx
3853 Changing power saving
settings.
On Server blade N, Power saving
setting is changed. Channel:xxx
Category:xxx Detail:xxx Value:xxx
385A Changing date and time
settings
On Management module, date and
time is changed. Channel:xxx
Category:xxx Detail:xxx Value:xxx
3861 Changing N+M cold
standby settings for
server blade.
On Server blade N, N+M cold
standby partition information
setting is changed. Channel:xxx
3862 Changing server blade
settings.
On Server blade N, setting is
changed. Channel:xxx Category:xxx
Detail:xxx Value:xxx
Functional detail
2-273
Hitachi Compute Blade 500 Series Management Module Setup Guide