Hologic Affirm - Verify the Position of the Biopsy Device

Affirm Breast Biopsy Guidance System User Guide
Chapter 5: Biopsy
MAN-06411-002 Revision 003 Page 63
5.4.1 Verify the Position of the Biopsy Device
If desired, use the following steps to verify the position of the biopsy device.
1. Acquire the pre-fire images as necessary to identify the correct needle position.
• Verify the needle position.
• Make adjustments as necessary.
2. If applicable, fire the biopsy device.
3. If desired, acquire the post-fire images.
• Verify the needle position.
• If necessary, make adjustments.
4. If desired, acquire specimens with the attached biopsy device.
5. If desired, acquire post procedure images.