ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual
6.27
USER INTERFACE
Lab Name
Figure 6-31 Set Lab Name Button
To enter or edit a name for the facility at which the instrument is located, press the
Lab Name
button.
Press the letter buttons to enter a name, up to 20 characters long. (Long names that use wide letters
may appear cut off on the display, but 20 characters are accepted in the field and will print on the
reports.)
Refer to Figure 6-32. To create a capital letter, press the
Shift
button and then press the letter. With the
next letter, the system reverts to lowercase. Use the
Space
button for a space and the
Delete
button to
remove entered letters.
Press the
abc/123
button to display a keypad screen to enter numbers and characters. Use the
Alt
key
to enter characters on the top row. Switch between keyboard and keypad as often as desired before
saving changes.
Lab Name
button shows
current setting
To Next Page
Loading...
