USER INTERFACE
6.36
ThinPrep™ 5000 Processor with AutoLoader Operator’s Manual
Figure 6-48 Lab Information System Selections
Note:
The copy batch report and the process sample policy can be changed independently of each
other.
Select the settings by pressing the
Yes
or
No
buttons for each field. These settings will persist until
the operator changes them.
Clean Screen
This is described in Chapter 8, Maintenance.
Empty Liquid Waste
This is described in Chapter 8, Maintenance.
Batch reports will be copied to the NAS for access
via the LIS server. (Note, they will also reside in
the system database for 8 weeks before being
purged.)
Vials will be processed even if the label design
calls for LIS data that is not available.
Batch reports will not be copied to the LIS server.
Vials will not be processed if the label design calls
for LIS data that is not available. (The vial is
returned to the vial tray and the batch report will
flag it as error 5201 - failure to read LIS data file.)
To Next Page
Loading...
