Honeywell MPA2C3 - Configuring FACP input functionality; Door Access Modes

MPA2C3 User Manual 109
In the Web User Interface there are many references to Door Access Modes.
In sections 4.3 and further
Door Access Modes and Door lock behaviors
The below table describes the Door Status per Normal or Reversed Door Access
Mode.
MPA2C3 Fail-Secure Installation FAIL-SAFE INSTALLATION
Scenarios DOOR STATUS 1-4
OUT1, OUT3 (AUX1), OUT2, OUT4 (AUX2))
PANEL DOOR ACCESS
MODE
NORMAL REVERSED
NORMAL
OPERATION
LOCKED with functional operator control/ card swipes/ schedules
POWER
LOSS
Panel Power loss (12v
Internal powered lock)
LOCKED,
non functional operator control/ card
swipes/ door schedules
UNLOCKED,
non functional operator control/
card swipes/ door schedules
External PSU for locks
Power loss
Panel Power loss with
External PSU for locks
operational
FACP FACP input triggered
(Fire alarm)
FACP input idle. LOCKED with functional operator control/ card swipes/ schedules
P
R
I
O
R
I
T
Y