MPA2C3 User Manual 131
• Holidays
• Access Group Name (access group details are panel-specific)
• Configuration (Site Codes)
Access control behavior during synchronization
• Primary Panel access control not affected.
• Newly registered secondary panels will show online in Web Interface and will
keep its existing card and common config. Once common data received,
secondary's access control and communication processes stop running and the
existing common data will be overwritten by new one from primary. Once the
common data is received the Secondary panel will reboot.
• Approximately 4 minutes for secondary panel access control to function after
registration and synchronization.
Restore Entire Loop Detail Chart
System Wide Backup Restore
Primary panel to the Secondary panel downloads the following:
• Common Data
• Panel-specific data
Example:
System Restore in the following order with (3) Secondary Panels:
1. The 1st Secondary panel will receive the backup and reboot.
2. The 2nd Secondary panel will receive the backup and reboot
3. The 3rd Secondary panel will receive the backup and reboot.
4. The Primary panel will receive the backup and reboot
Common data includes:
• Schedules
• Cards
• Card Formats
• Holidays
• Access Group Name (access group details are panel-specific)
• Configuration (Site Codes)
To Next Page
Loading...
Need help?
General
