MPA2C3 User Manual 53
Figure 2-20
5. Click Save
Configuring Doors
Each panel supports from 1-4 doors depending on the license applied on the
panel. For each door, you must configure the readers, inputs, and outputs.
MPA2C3 supports:
•
2 Door Controller: Each door can be controlled by 2 Wiegand readers (Reader A: IN / READER
B: OUT) or by 2 OSDP readers (IN and OUT).
Door Controller
• 4 Door Controller: Each door can be controlled by 1 Wiegand reader (Reader A:
IN) or by 2 OSDP readers (IN and OUT)
Note: You must assign doors to a Space before you can configure the doors. See
Configuring
Spaces on pageXXXXXX
Accessing the Doors Configurations
1. Navigate to the Configure your Spaces tab by doing one of the following:
• Click Menu > Configuration, or
• Click Spaces in the Dashboard.
Figure 2-21 Configure your Spaces Tab
To Next Page
Loading...
