Honeywell MPA2C3 User Manual

MPA2C3 User Manual 43
Configuring the Network Settings
In the Panel Configuration page, you can configure the following network-related
settings:
• View the panels MAC Address
• Set network settings to Static or DHCP
• Configure the IP address of the panel
• Configure the Subnet Mask
• Configure the Default Gateway
Scroll down to the Network section.
Note: Only the primary panel will display network information.
The General section allows the user to:
• Configure the panel's name
• View the active and inactive firmware version
• Toggle the firmware version set
• Reset the panel
• View the panel type
• View the last boot time of the panel
Other fields in the Panel Configuration > Settings > General section are Firmware
Version, Reset, Panel Type, and Boot Time.
Configuring Time Management
In the Panel Configuration page, you can configure the following time-related set-
tings:
• Set the current time.
Scroll down to the Time Management section.
Figure 2-1 Time Management Section

Honeywell MPA2C3 Specifications

General

Brand	Honeywell
Model	MPA2C3
Category	IP Access Controllers
Language	English