To Next Page

To Previous Page

138 MPA2C3 User Manual

After upgrading a MPA2C3 panel, you must clear your browser’s cache. See

Clearing

the Cache and Cookies in the Internet Browsers Used by the MPA2C3 Web Server

for details.

Shutting Down and Restart the Panel

The SHUTDOWN button allows you to shut down the control panel securely. This

ensures that the system can save all necessary data and status in the flash mem-

ory. Shutting down the panel disables the inputs/outputs, turns OFF the peripheral

bus, AUX outputs and the PTCs. However, it cannot remove power from the panel

(from the AC power adapter or the batteries).

Shutdown the control panel:

1. Press the SHUTDOWN button for 5 seconds.

2. Running LED is off, Panel is shut down (hibernate state).

Note: After shutdown the power is not removed from the panel, to restart the panel, please

press Shutdown button shortly (NOT 5 Seconds)

Note: To completely power off the control unit,

a. When the unit is powered by PSU, first disconnect the battery cable and

then disconnect the AC power cable.

b. When the unit is powered by PoE+, disconnect the PoE+ cable.

Restart the Panel

Note: Before powering up the access control unit, ensure that the access control unit is

Honeywell MPA2C3 User Manual

Other manuals for Honeywell MPA2C3