MPA2C3 User Manual 67
Configuring Inputs
The Inputs tab enables you to:
• Enter a name for the input.
• Configure input modes, including the state.
• Configure shunt and debounce settings.
• Configure input schedules.
1. Navigate to the Input tab:
• Click Panel Configuration
> Inputs, or
• Click Panels in the Dashboard.
Figure 2-32 Configuring Panel Inputs
4. Click to select an input.
5. Select Input Modes.
Table 2-8
Configuration Description
Normally Normally Closed means that the input’s normal state is closed.
(Default setting).
Normally Open means that the input’s normal state is open.
To Next Page
Loading...
