MPA2C3 User Manual 89
• View other panels with readers in this access group.
Note: Since an access group is defined by door and schedule configurations, you must
configure the door (see
Configuring Doors on page 44), people (see Configuring People section
on page
82), and the schedule (see Entering a Panel Name section on page 42) before
configuring an access group.
To navigate to the Access Configuration page, click:
• Menu > Configuration > People & Access > Access > Create an Access Group, or
• Access Groups in the Dashboard, then Create an Access Group.
Figure 2-47 Access Group Configuration Page
To Next Page
Loading...
