Section 8 – Automation Communication Formats
8–17
Table 8–23: Contact ID Event Definition Codes (continued)
EVENT DATA TYPE
Communication Troubles -350 and 360
350 Communication trouble Zone
351 Telco 1 fault Zone
352 Telco 2 fault Zone
353 Long Range Radio xmitter fault Zone
354 Failure to communicate event Zone
355 Loss of Radio supervision Zone
356 Loss of central polling Zone
357 Long Range Radio VSWR problem Zone
Protection Loop -370
370 Protection loop Zone
371 Protection loop open Zone
372 Protection loop short Zone
373 Fire trouble Zone
374 Exit error alarm (zone) Zone
375 Panic zone trouble Zone
376 Hold-up zone trouble Zone
377 Swinger Trouble Zone
378 Cross-zone Trouble Zone
Sensor Trouble -380
380 Sensor trouble Zone
381 Loss of supervision - RF Zone
382 Loss of supervision - RPM Zone
383 Sensor tamper Zone
384 RF low battery Zone
385 Smoke detector Hi sensitivity Zone
386 Smoke detector Low sensitivity Zone
387 Intrusion detector Hi sensitivity Zone
388 Intrusion detector Low sensitivity Zone
389 Sensor self-test failure Zone
391 Sensor Watch trouble Zone
392 Drift Compensation Error Zone
393 Maintenance Alert Zone
OPEN/CLOSE/REMOTE ACCESS
Open/Close -400, 440, 450, 460
400 Open/Close User
401 O/C by user User
402 Group O/C User
403 Automatic O/C User
404 Late to O/C (Note: use 453, 454 instead) User
405 Deferred O/C (Obsolete- do not use) User
406 Cancel User
407 Remote arm/disarm User
408 Quick arm User
409 Keyswitch O/C User
441 Armed STAY User
442 Keyswitch Armed STAY User
450 Exception O/C User
451 Early O/C User
452 Late O/C User
453 Failed to Open User
454 Failed to Close User
455 Auto-arm Failed User
456 Partial Arm User
457 Exit Error (user) User
458 User on Premises User
459 Recent Close User
461 Wrong Code Entry Zone
To Next Page
