Honeywell MX8000 - Page 88

MX8000 Installation and Operation Guide
5–32
Table 5–11: Line Device Menu Options (cont’d)
Select
Device
Type
Line
Device
Menu
Choice Choice Choice Choice Default Comments
4/2
In High Speed,
messages with event
codes of B, C, E, and
F are translated to
ADEMCO High Speed
messages.
BFSK Auto
High Speed
✔
3/1
✔
3/1 Restore
High Speed
Standard method:
123 2, 123 9
Converted to High
Speed:
0123 5355 5555 7
Normal
4/2 Out
High Speed
✔
In High Speed mode,
messages with event
codes of B and C are
translated to High
Speed Opening and
Closing messages,
respectively.
S/Fast
✔
FBI
LAR300
Extended
✔
Pulse
Extended
Not Extended
A sequence of 1234 B
, BBBB 7 is combined
into a 4-2 message of
1234 B7. (Applies to
B,C,E,F). This mes-
sage would either be
put out to Automation
as 4-2 or High Speed.
When the option is
selected, the receiver
does not combine the
expanded messages.
They are output in the
same form as
received.
High Speed
✔
Ademco
Auto Opt
Extended
Output
4/2
If low speed expanded
messages are
received and
combined (See Pulse
Extended above), the
messages are output
to Automation as 4-2
format messages. For
example, a sequence
of 1234 B , BBBB 7 is
combined and output
as a 4-2 message of
1234 B7.
Transmit
Gain
–3 through –
6, –8, –10, –
11, –12, or –
14dB
–8db
MX8000–
LC3
3 Line
(cont’d)
Edit Line
(cont’d)
Line #
(cont’d)
Line Gain
Opt
Receive
Gain
0 through
12dB in 3dB
steps
6db
Controls the transmit
and receive gain for
the line.