Honeywell MX8000 - Page 92

MX8000 Installation and Operation Guide
5–36
Table 5–11: Line Device Menu Options (cont’d)
Select
Device
Type
Line
Device
Menu
Choice Choice Choice Choice Default Comments
Not Used
✔
Common
See page 5–62 for
more information.
Must not be used in
UL installations.
Listen Mode
PBX
PBX String
edit
See page 5–62 for
more information.
Timeout
0-255 0
See page 5–63 for
more information.
Add Account None
Edit Account
Listen In
Listen In
account edit
Clear Account
See page 5–63 for
more information.
Y (Yes)
Echo
Suppress
N (No)
✔
Outputs a 2 second
2025Hz tone to
disable echo
suppression
equipment that may
interfere with modem
formats.
Yes
✔
Caller ID
No
Caller ID to
Automation: When
enabled, Caller ID
information is output to
the automation system
only in the event that
no alarm data is
received from a
security system control
panel.
Caller ID to Printer
Ports: When enabled,
Caller ID information is
output to the printer
port(s) for every call
received at the time
that the Caller ID
information is available
from the Public
Switched Telephone
Network (normally
between the first and
second ring.) This
option should only be
used when connected
to a parallel or serial
printer or equivalent.
Y (Yes)
Initiates a 2-second
delay at the start of
each call before the
handshake delay.
Billing Delay
N (No)
✔
See page 5–65 for
more information.
MX8000–
LC1
1 Line
(cont’d)
Edit Line
(cont’d)
Line #
(cont’d)
Misc. Line
Options
Hunt Group 00-99 00
Allows multiple line
cards to report under
the same group
number to the
automation software.