Honeywell XENON 1902 - Page 315

Xenon/Granit User Guide 295
UPC-E0 Default All UPC-E
Settings
UPEDFT 210
Off UPEEN00 210
*On UPEEN01 210
UPC-E0 Expand *Off UPEEXP0 210
On UPEEXP1 210
UPC-E0 Addenda Required Required UPEARQ1 211
*Not Required UPEARQ0 211
Addenda Timeout Range (0 - 120) *500 DLYADD##### 211
UPC-E0 Addenda Separator *On UPEADS1 211
Off UPEADS0 211
UPC-E0 Check Digit Off UPECKX0 212
*On UPECKX1 212
UPC-E0 Leading Zero Off UPENSX0 212
*On UPENSX1 212
UPC-E0 Addenda 2 Digit Addenda On UPEAD21 212
*2 Digit Addenda Off UPEAD20 212
5 Digit Addenda On UPEAD51 212
*5 Digit Addenda Off UPEAD50 212
UPC-E1 *Off UPEEN10 213
On UPEEN11 213
EAN/JAN-13 Default All EAN/
JAN Settings
E13DFT 213
Off E13ENA0 213
*On E13ENA1 213
Convert UPC-A to EAN-13 UPC-A Converted to EAN-13 UPAENA0 213
Do not Convert UPC-A UPAENA1 213
EAN/JAN-13 Check Digit Off E13CKX0 214
*On E13CKX1 214
EAN/JAN-13 2 Digit Addenda 2 Digit Addenda On E13AD21 214
*2 Digit Addenda Off E13AD20 214
5 Digit Addenda On E13AD51 214
*5 Digit Addenda Off E13AD50 214
EAN/JAN-13 Addenda Required *Not Required E13ARQ0 214
Required E13ARQ1 214
Addenda Timeout Range (0 - 120) *500 DLYADD##### 215
EAN/JAN-13 Addenda
Separator
Off E13ADS0 215
*On E13ADS1 215
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page