HP 8114A - Removing the Microprocessor Board; Location of the Microprocessor Board; Top View Showing the Microprocessor Securing Screws

HP 8114A Service Guide
Removing the Microprocessor Board
Figure 4-8. Location of the Microprocessor Board
The microprocessor board is located at the upper side of the tunnel
where the power supply is mounted. See Figure 4-8.
1. Before removing the microprocessor board the cover and power
supply have to be removed. So, follow the instructions for
Removing the Instruments Cover, and Removing the Power Supply,
first.
Figure 4-9.
Top View Showing the Microprocessor Securing Screws
Disassembly and Reassembly
4-l 1