HP 8114A - Test 3: Delay

Test 3: Delay
Test Specifications Range
Resolution
Accuracy
RMS-Jitter
Fixed: typical 42.0 ns
Variable: 0.00 ns to 999 ms
3 digits, best case 10 ps
*t%flns
0.03% + 26 ps (0.05% +25 ps for 50 ns <delay <IO0
ns)
Equipment Needed
Digitzing Oscilloscope with Accessories
Pulse Generator
Counter
Cable, 50 52, coaxial, BNC
Procedure
1. Connect HP 8114A to the Scope as shown:
WITH SMA/BNC
ADAPTOR
Connecting HP 8114A to the Scope
2. Set the Pulse Generator to:
Period
1 PS
Width 100 ns
Amplitude 1 V
Offset
OV
output Enable
3. Select the TRIGGER page on the HP 8114A and set up as follows:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IhTmEmmQUTPU71m I
The TRIGGER Page Set-up
J-10 Testing the HP 8114A