HP 8114A - Polarity; Source Impedance; Load Compensation; Connector

EIP 8114A Specifications
Polarity
Positive or negative pulses selectable
Source Impedance
5061 or High Impedance (>lOkQ typ.) selectable
Load Compensation
For loads # 500 the actual load can be entered to correct output
values
Connector BNC
On/Off:
Relay connects/disconnects output
Output Protection
A
4
Maximum external voltage 100 Vpp from external 500 source
(& 20 Vdc from external On source)
Limits
Programmable level and duty-cycle limits restrict the available output
range to protect the DUT.
Pulse Performance
Overshoot/Preshoot/Ringing:
~t5% of amplitude h 50 mV
Settling time:
Cl00 ns typical
Transition Times:
Measured between 10% and 90% of amplitude,
5061 into 5061: <7ns (amp1 >5 V)
HIZ (High-Z) into 500 ~12 ns (amp1 >lO V)
HP 8114A Pulse Generator 2-5