HP 8114A - Test &La: Leading Edge Test; Procedure

Test 8.la: Leading Edge Test
Leading edge for amplitudes >5 V from 5052 into 5062.
Procedure
1. Connect HP 8114A t.o the Scope as shown:
1
N’ TYPE TO BNC ADAPTOR
Connecting HP 8114A to the Scope
On the HP 8114A press TRIGGER and set up page as follows:
2. On the HP 8114A set-up the OUTPUT page as shown in the
following illustration:
fi Per 500 us Out ON
!iSBBWiMoDlFVl
Inh OFF f
DLZldY
0.00 r’s Baselne! +0.00 w
Dut yCyc 50.0 ‘,. fb!plitd mu
10.0
50R irk o 50.0 R .-XL.-. Posit iwe
w-
IlTmizFlTRICiGERIIOUTPUTIILIMITSI
Configuring the Output Rage
Testing the HP 8114A
3-37