HP 8114A - B) Amplitude Test (from HIZ {High-Z} into 500); Procedure

B) Amplitude Test (from EIIZ {High-Z} into 500)
Procedure
I. Connect HP 8114A to the DVM as shown:
2. On the HP 8114A set up the CKJTPUT page as shown in the
following illustration:
r Per 188 MS
Out ON
IAtannirulI
Inh OFF f
Delay 50.0~s Baselne +0.00U 5
DutyCyc 15.0 :: fit-iplitd 2.00U *‘IL
n
I,LL 50.0~ . ..n...
Posit iw
I II
1’ t%& 1 OUTPUT I I LIMITS I ‘1 CONFIG 1 ‘I
Configuring the Output Page
3. Set HP 8114A Delay to 0 ns
4. ‘I&e the baseline reading as BHIZ
5. Set HP 8114A Delay to 50 ms and Amplitude to 2 V
3.32 Testing the HP 8114A