HP 8114A - Page 115

HP 8114A Service Guide
Caution
a
b. Remove the panel
8. Key pad flexible connector
a. Remove carefully from the locating posts securing the flexible
connector to the Front Panel frame (see “How to Remove PC
Hoards from Plastic Support Clips”)
9. Large Key pad
a. Holding the rubber Key pad at each end, lift the Key pad clear
of the Front Panel frame, disengaging the keys from their
cut,-outs and the locating posts (see “How to Remove PC Boards
from Plastic Support Clips”)
10. Small Key pad
a. Holding the rubber Key pad at each end, lift the Key pad clear
of the Front Panel frame, disengaging the keys from their
cut-outs and the locating posts (see “How to Remove PC Boards
from Plastic Support Clips”)
11. Front Panel Legend foil
Be sure that you want to remove the Front Panel foil, as it is
extremely unlikely that you will be able to refit the original foil. A
new foil, Part No: 08114-40202, will be required.
a. Remove by prising up one corner to allow a firm grip on the
foil and pull up from the Front Panel frame until completely
freed.
Disassembly and Reassembly 4-25