HP 8114A - Page 150

HP 8114A Service Guide
-222
-222
-222
-222
-222
-222
-223
-224
-240
Data out of range
HPIB message = “Can’t talc. Dutycycle: PERIOD
UNKNOWN”
Local message = “Can’t talc. DutyCycle: PERIOD
IJNKNOWN”
Data out of range
HP-IB message = “Can’t talc. TrailDelay: DELAY
1JNKNOWN’
Local message = “Can’t talc. TrailDelay: DELAY
IJNKNOWN”
Data out of range
HP-IB message = “Period too small”
Local message = “Period too small”
Data out of range
HP-IB message = “Width too small”
Local message = “Width too small”
Data out of range
HP-IB message = “Delay too small”
Local message = “Delay too small”
Data out of range
HP-IB message = “Double delay too small”
Local message = “Double delay too small”
Too much data
HP-IB message = “[device-dependent info]”
Local message = “[device-dependent info]”
Description:
An unrecognized command or data type was
encountered for example, a string was received when
the device does not accept strings.
Illegal parameter value
HP-IB message = “Invalid key code [key code]”
Local message = “Invalid key code [key code]”
Description:
SYSTEM:KEY command was used with illegal key
code.
Hardware error
HP-IB message = “Serial EEPROM read/write
error”
Local message = “Serial EEPROM read/write error”
5.32 Troubleshooting