12
Safety Summary
WARNING Use of controls or adjustments or performance of procedures other
than those specified for the laser source may result in hazardous
radiation exposure.
WARNING Refer Servicing only to qualified and authorized personnel.
WARNING Do not enable the laser when there is no fiber attached to the optical
output connector.
Tunable Laser Source Modules and Laser Source Modules have optical
output connectors.
The laser is enabled by pressing the gray button beside the optical
output connector on the front panel of the module. The laser is enabled
when the green LED on the front panel of the instrument is lit.
WARNING Under no circumstances look into the end of an optical cable attached
to the optical output when the device is operational.
The laser radiation can seriously damage your eyesight.
WARNING The use of optical instruments with this product will increase eye
hazard.
To Next Page
Loading...
