177
Performance Tests
Equipment Required
Equipment required for the Performance Test is listed in the table
below. Any equipment that satisfies the critical specifications given
in the table may be substituted for recommended models.
Test Record
Results of the Performance Test may be tabulated in the Test
Record provided after the test procedures. It is recommended that
you fill out the Test Record and refer to it while doing the test.
Since the test limits and set-up information are printed on the Test
Record for easy reference, the record can also be used as an
abbreviated test procedure (if you are familiar with test
procedures). The Test Record can also be used as a permanent
record and may be reproduced without written permission from
Hewlett-Packard.
Instrument Description of Instrument/Accessory Alternative Models
HP 8163A or
HP 8164A
Mainframe, the Device Under Test (DUT)
HP 81552SM Laser Source HP 81553SM, HP 81554SM
HP 81531A Power Sensor HP 81532A, HP 81536A,
HP 81530A, or
HP 81533B Optical Head
Interface Module plus
HP 81524A Optical Head
(or HP81520A, HP 81521B,
HP 81525A)
HP 81682A Tunable Laser Module HP 81680A, HP 81640A
2 x HP 81000AI Connector Adapter (Head) Any other HP interface or HP
adapter,
dependent on patchcord
HP 81101AC Singlemode Fiber Any other HP patchcord
To Next Page
Loading...
