HP 8163A - How to Set the Power Unit; What Are the Power Units

64
Power Measurement
How to Measure Power
3 Move to 2 and press ENTER.
4 Press the [Close] softkey to exit the menu.
How to Set the Power Unit
Pressing the Power Unit softkey allows you to select either W, dB,
or dBm as the units in which power is displayed. The Power Unit
softkey is visible when you move to the P or Ref parameters.
alternatively the Power Unit can be changed by using the Power
Meter menu.
What are the Power Units ?
Watts (W) are the SI unit for power measurement.
Figure 3-1 The Number of Digits Menu