HP 8163A - Page 17

17
Table of Contents
3 Power Measurement
3.1 How to Measure Power ..........................................63
The Power Value ................................................................ 63
How to Set the Number of Digits 63
How to Set the Power Unit ................................................. 64
What are the Power Units ? 64
How to Set the Calibration Offset ...................................... 66
How to Set the Reference Level ......................................... 67
How to Input a Reference Level 67
How to Set the Reference Value to the Current Power
Value 68
How to Reference Another Power Measurement
Channel 68
How to Set the Wavelength ................................................ 70
How to Remove Electrical Offsets ..................................... 70
How to Choose the Range Mode ........................................ 73
How to Set the Range ......................................................... 74
Upper Power Limit and Resolution 80
How to Set the Averaging Time ......................................... 80
How to Choose the MinMax Mode .................................... 81
How to Turn Off MinMax Mode ........................................ 84
How to Hold the Screen ...................................................... 85
4 Laser Sources
4.1 How to Use Laser Source Modules ........................89
The Laser Wavelength Value ............................................. 89
Dual-Wavelength Laser Source Modules 90