HP 9000 Series Service Manual

B-24 Appendix B
Support Information
-----Main Help --------------------------------------------------------
The Main menu is the first menu displayed when the firmware user
interface is executed. The other menus available to the user are
listed here.
Type DIsplay to view the commands available from this menu.
Other menus can be accessed by entering the name of the menu at the
command prompt. From a given menu, a command from any other menu can
be executed by entering the menu name that is associated with the
For example, to execute the DaTe command (in the Configuration menu)
from the Main menu, type "co dt"
Type HElp MAin to see all available commands listed under their
respective menus.
------
----Configuration Help -----------------------------------------------
The configuration menu consists of commands that are used for
viewing or modifying the configuration and state of the system.
Type display to view the commands available from this menu.
Other menus can be accessed by entering the name of the menu at the
command prompt. From a given menu, a command from any other menu can
be executed by entering the menu name that is associated with the
command, followed by the command.
For example, to execute the WArnings command (in the Information menu)
from the Configuration menu, type "in wa".
Type HElp MAin to see all available commands listed under their
respective menus.
-----
----Information Help-------------------------------------------------
The Information menu consists of commands that are used for
viewing information about the configuration and state of the system.
Type DIsplay to view the commands available from this menu.
Other menus can be accessed by entering the name of the menu at the
command prompt. From a given menu, a command from any other menu can
be executed by entering the menu name that is associated with the
command, followed by the command.
For example, to execute the DaTe command (in the Configuration menu)
from the Information menu, type "co dt".
Type HElp MAin to see all available commands listed under their
respective menus.
------

HP 9000 Series Specifications

General

Operating System	HP-UX
Manufacturer	Hewlett-Packard (HP)
Series	9000
Type	Server
Processor	PA-RISC
Memory	Varies by model
CPU	PA-RISC processors
Expansion Slots	Varies by model
Networking	Ethernet
Form Factor	Rackmount
Models	A-Class, D-Class, E-Class, K-Class, N-Class, RP Series, Superdome