HP EVA P6000 - Page 84

1. Install the HP P6000 iSCSI/FCoE and MPX200 Multifunction Router kit.
a. Start the installer by running Launch.exe; if you are using a CD-ROM, the installer
should start automatically.
b. Click Install iSCSI/FCoE software package (see Figure 23 (page 84) and Figure 24
(page 84)).
Figure 23 Windows Server 2003 kit
Figure 24 Windows registry and controller device installation
For Windows Server 2003, the Microsoft iSCSI initiator installation presents an option
for installing MPIO using the Microsoft generic DSM (Microsoft MPIO Multipathing Support
for iSCSI check box). For Windows Server 2008, MPIO is installed separately. See
Figure 25 (page 85).
84 iSCSI or iSCSI/FCoE configuration rules and guidelines