System Wizard Step 3—Verify Storage System
1. Verify that all the system information is correct.
2. Click Next to proceed to the next wizard step.
System Wizard Step 4—Configure Networking
1. Complete the required fields.
• Storage System Name
• IPv4 Configuration
◦ IPv4 Address
◦ Subnet Mask
◦ Gateway
2. Click Next to proceed to the next wizard step.
System Wizard Step 5—Configuring Time
The Copy time options from the Service Processor option is selected by default and is
automatically populated with the time and date entered in the 3PAR Service Processor Setup
Wizard.
1. Select the Enter data and time manually option if you want to manually enter the date and
time. If you select Automatic, complete the NTP Server field and click Test to get the
specified NTP time.
2. In the Time Zone section, select the appropriate region.
3. Click Next to proceed to the next wizard step.
System Wizard Step 6—Change Password
This login profile is used to add this system to the SP and for initial administrative access to the
system.
NOTE: Passwords for the 3paradm username can include any printable characters and be
between 6-8 characters in length.
1. Enter a new, secure password for the username 3paradm.
2. Click Next to proceed to the next wizard step.
HPE 3PAR Storage System Setup Wizard 111
To Next Page
Loading...
Need help?
General