B Enhancing Security with Data Encryption
HPE 3PAR Data Encryption security feature allows you to encrypt all specifically formatted drives
on the system with an authentication key and the use of self encrypting drives (SEDs) or Federal
Information Processing Standard (FIPS) capable drives.
When a Data Encryption license is registered, you must manually enable the encryption feature
on the system. When the encryption feature is enabled successfully, all the drives in the system
become automatically set in an encrypted state.
NOTE: To review the encryption status of individual drives within the system, use the SSMC.
This feature allows you to perform the following encryption-related tasks:
• Check encryption status
• Enable encryption
• Back up an authentication key
• Restore an authentication key
• Generate a new key
• Recover a key
For more information about enabling the feature, see the HPE 3PAR StoreServ Management
Console User Guide at:
http://www.hpe.com/info/storage/docs
CAUTION: Hewlett Packard Enterprise recommends retaining all acquired software product
licenses for reference and maintenance purposes. For assistance with licensing, contact Hewlett
Packard Enterprise Support or see:
www.hpe.com/software/licensing
121
To Next Page
Loading...
Need help?
General