In the HPE 3PAR StoreServ Management Console (SSMC) or HPE 3PAR CLI, the enclosures
are displayed as follows:
• DCS8 = SFF 2.5-inch drive enclosure
• DCS7 = LFF 3.5-inch drive enclosure
• DCN2 = controller node enclosure
Drives
Drive types:
• FC SFF 10 K or 15 K
• NL SFF and LFF 7.2 K
• SSD SFF 480 GB, 920 GB, 1.92 TB, 3.84 TB
• SSD LFF 480 GB
Drive sizes:
• SFF 2.5-inch drives—Can be installed only in SFF 2.5-inch drive enclosure and the controller
node enclosures.
• LFF 3.5-inch drives—Can be installed only in the LFF 3.5-inch drive enclosure.
For more information, see “Drives Installation” (page 65).
Drives 29