Acclimating the System
Before powering on the system, the system might require up to 24 hours to acclimatize to the
new operating environment when outside-to-inside conditions vary significantly. If the system or
its components have experienced environmental changes during the transit, allow enough time
for the system to acclimatize before proceeding with the power-on sequence.
CAUTION: To prevent potential damage to system hardware, do not power on the system
until it is fully acclimatized. If condensation is present after the 24-hour acclimatization period,
wait for all condensation to fully evaporate before completing the power-on sequence.
84 System Setup Verification
To Next Page
Loading...
