FC Port LEDs
The controller node has two onboard FC ports; each includes two LEDs. The arrow head-shaped
LEDs point to the port they are associated with.
NOTE: Incorrectly configured cables result in illuminated amber LEDs.
Port position is displayed as Node:Slot:Port (N:S:P) in the SSMC.
Slot:PortPort
N:0:1FC-1
N = Node number
N:0:2FC-2
N = Node number
Figure 6 FC ports LEDs location
Table 5 FC Ports LEDs description
IndicatesStateAppearanceLED Function
Wake up failure (dead device) or power not appliedOffNo lightAll ports
Not connectedOffAmberPort Speed1
Connected at 8 Gb/s3 Fast
Flashes
Connected at 16 Gb/s4 Fast
Flashes
Normal/Connected – link upOnGreenLink Status2
Link down or not connectedFlashing
Controller Nodes 19
To Next Page
Loading...
