HP HPE iLO 5

Power Supplies list
Some power supplies do not provide information for all the values in this list. If a power supply does not
provide information for a value, N/A is displayed.
This section is displayed for nonblade servers (DL, ML).
• Bay—The power supply bay number.
• Present—Indicates whether a power supply is installed. The possible values are OK and Not
Installed.
• Status—The power supply status. The displayed value includes a status icon (OK, Degraded, Failed,
or Other), and text that provides more information. The possible values follow:
◦ Unknown
◦ Good, In Use
◦ Good, Standby
◦ General Failure
◦ Over Voltage Failure
◦ Over Current Failure
◦ Over Temperature Failure
◦ Input Voltage Lost
◦ Fan Failure
◦ High Input A/C Warning
◦ Low Input A/C Warning
◦ High Output Warning
◦ Low Output Warning
◦ Inlet Temperature Warning
◦ Internal Temperature Warning
◦ High Vaux Warning
◦ Low Vaux Warning
◦ Mismatched Power Supplies
• PDS—Whether the installed power supply is enabled for Power Discovery Services.
• Hotplug—Whether the power supply bay supports swapping the power supply when the server is
powered on. If the value is Yes, and the power supplies are redundant, the power supply can be
removed or replaced when the server is powered on.
• Model—The power supply model number.
• Spare—The spare power supply part number.
• Serial Number—The power supply serial number.
Power Supplies list 159