Removing a task from the Installation Queue
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Firmware & OS Software in the navigation tree, and then click Installation Queue.
2. Click the remove component icon .
iLO prompts you to confirm the request.
3. Click Yes, remove.
The component is removed.
Installing language packs
Prerequisites
Configure iLO Settings privilege
Procedure
1. Download a language pack from the following website: http://www.hpe.com/support/ilo5.
2. To extract the contents, double-click the downloaded file.
The language pack file name is similar to the following: lang_<language>_<version>.lpk.
3. Click Firmware & OS Software in the navigation tree, and then click Update Firmware.
The Flash Firmware controls appear.
4. Click Browse (Internet Explorer or Firefox) or Choose Files (Chrome).
5. Select a language pack, and then click Open.
6. Optional: To save a copy of the language pack file to the iLO Repository, select the Also store in iLO
Repository check box.
7. Click Flash.
iLO prompts you to confirm the installation request.
8. Click OK.
iLO installs the selected language pack, reboots, and closes your browser connection.
It might take several minutes before you can re-establish a connection.
Viewing software information
Prerequisites
To display a complete set of data on this page, AMS must be installed.
Removing a task from the Installation Queue 81
To Next Page
Loading...
Need help?
General