EasyManuals Logo
Home>HP>Server>HPE iLO 5

HP HPE iLO 5 User Manual

HP HPE iLO 5
411 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #378 background imageLoading...
Page #378 background image
5. Select the Personal > Certificates folder.
6. Right-click the folder and select Request New Certificate.
7. Verify that the Type is domain controller, and click Next until a certificate is issued.
Directory Server DNS Name test reports a failure
Symptom
The Directory Server DNS Name test reports the status Failed.
Cause
iLO cannot obtain an IP address for the directory server.
Action
• Verify that the DNS server configured in iLO is correct.
• Verify that the directory server FQDN is correct.
• As a troubleshooting tool, use an IP address instead of the FQDN.
• If the problem persists, check the DNS server records and network routing.
Ping Directory Server test reports a failure
Symptom
The Ping Directory Server test reports the status Failed.
Cause
iLO pinged the directory server and did not receive a response.
Action
• Check to see if a firewall is active on the directory server.
• Check for network routing issues.
Connect to Directory Server test reports a failure
Symptom
The Connect to Directory Server test reports the status Failed.
Cause
iLO failed to initiate an LDAP connection with the specified directory server.
378 Directory Server DNS Name test reports a failure

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP HPE iLO 5 and is the answer not in the manual?

HP HPE iLO 5 Specifications

General IconGeneral
BrandHP
ModelHPE iLO 5
CategoryServer
LanguageEnglish

Related product manuals