Hewlett Packard Enterprise. This information is used for troubleshooting issues and closed-loop quality
analysis.
• Insight Online direct connect—Data is transmitted every seven days. You cannot edit or delete the
Active Health System reporting schedule.
• Insight Remote Support central connect—Data is transmitted every seven days. You can change the
day of the week for Active Health System reporting transmission in the Insight RS Console. For more
information, see the Insight RS online help.
Sending data collection information
Prerequisites
Configure iLO Settings privilege.
Procedure
1. Click Remote Support in the navigation tree, and then click the Data Collections tab.
2. Click Send Data Collection.
3. When prompted to confirm the request, click OK.
When the transmission is completed, the Last Data Collection Transmission and Last Data
Collection Transmission Status are updated. The date and time are based on the configured iLO
time zone.
Sending Active Health System reporting information
Prerequisites
Configure iLO Settings privilege.
Procedure
1. Click Remote Support in the navigation tree, and then click the Data Collections tab.
2. Click Send Active Health System Report.
3. When prompted to confirm the request, click OK.
The collected data includes Active Health System information from the last seven days.
When the transmission is completed, the Last Active Health System Reporting Transmission and
Last Active Health System Reporting Transmission Status are updated. The date and time are
based on the configured iLO time zone.
Sending data collection information 197
To Next Page
Loading...
Need help?
General