Memory Media
The proprietary media source of the memory module. For example, NAND or Proprietary.
State
The memory state.
Armed
The current backup-ready status of an NVDIMM-N, if available.
Last Operation
The status of the last operation.
Media Life
The percentage of media life left.
Viewing network information
If the server is powered off, the health status information on this page is current as of the last power off.
Health information is updated only when the server is powered on and POST is complete.
To view a full set of data on this page, ensure that AMS is installed and running. The server IP address,
add in network adapters, and the server NIC status are displayed only if AMS is installed and running on
the server.
The information on this page is updated when you log in to iLO. To refresh the data, log out of iLO, and
then log back in.
Procedure
1. Click System Information in the navigation tree, and then click the Network tab.
2. Optional: To expand or collapse the information on this page, click Expand All or Collapse All,
respectively.
Physical Network Adapters
Integrated and add-in NICs and Fibre Channel adapters
This section displays the following information about the integrated and add-in NICs and Fibre Channel
adapters in the server:
• Adapter number—The adapter number, for example, Adapter 1 or Adapter 2.
• Location—The location of the adapter on the system board.
• Firmware—The version of the installed adapter firmware, if applicable. This value is displayed for
system NICs (embedded and stand-up) only.
• Status—The NIC status.
â—¦ On Windows servers:
If the NIC has never been plugged in to a network, iLO displays the status Unknown.
If the NIC has been plugged in to a network, and is now unplugged, iLO displays the status Link
Down.
â—¦ On Linux servers:
60 Viewing network information
To Next Page
Loading...
Need help?
General