The SNMP Settings page is displayed.
2. Scroll to the SNMPv3 Users section.
3. Select a user profile in the SNMPv3 Users section, and then click Delete.
4. When prompted to confirm the request, click OK.
Configuring the SNMPv3 Engine ID
The SNMPv3 Engine ID sets the unique identifier of an SNMP engine belonging to an SNMP agent
entity.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Management in the navigation tree.
The SNMP Settings page is displayed.
2. Enter a value in the SNMPv3 Engine ID box.
This value must be a hexadecimal string of 6 to 32 characters, not counting the preceding 0x, and
must be an even number of characters (for example, 0x01020304abcdef).
3. Click Apply.
Configuring SNMP alerts
Prerequisites
Configure iLO Settings privilege
Procedure
1. Click Management in the navigation tree.
The SNMP Settings page is displayed.
2. Scroll to the SNMP Alerts section.
3. Configure the Trap Source Identifier by selecting iLO Hostname or OS Hostname.
4. Enable or disable the following alert types:
• iLO SNMP Alerts
• Cold Start Trap Broadcast
• SNMPv1 Traps
5. Optional: To generate a test alert and send it to the UDP addresses in the SNMP Alert Destination(s)
boxes, click Send Test Alert.
282 Configuring the SNMPv3 Engine ID
To Next Page
Loading...
