• High Vaux Warning
• Low Vaux Warning
• Mismatched Power Supplies
PDS
Whether the installed power supply is enabled for Power Discovery Services.
Power Discovery Services is an enhancement to the iPDU technology. If the chassis power supply is
connected to an iPDU, an additional summary table on this page displays the linked iPDUs.
Hotplug
Whether the power supply bay supports swapping the power supply when the chassis is powered on.
If the value is Yes, and the power supplies are redundant, the power supply can be removed or
replaced when the chassis is powered on.
Model
The model number of the power supply.
Spare
The part number of the spare power supply.
Serial Number
The serial number of the power supply.
Capacity
The capacity of the power supply (watts).
Firmware
The installed power supply firmware.
Intelligent PDU details
The Intelligent Power Distribution Units section is displayed only if the chassis power supplies are
connected to an iPDU.
After iLO is reset, or when an iPDU is attached, it takes approximately 2 minutes for the iLO web interface
to display the Intelligent Power Distribution Units table. This delay is due to the iPDU discovery
process.
The following information is displayed in the table:
• ID—The power supply bay number.
• Part Number—The iPDU part number.
• Serial Number—The iPDU serial number.
• IP Address—The iPDU IP address.
• SSL Port—The iPDU SSL port.
• MAC Address—The MAC address of the iPDU network port. This value helps you to identify each
connected iPDU because each iPDU has a unique MAC address.
Smart Storage Battery details
The following details are displayed on servers that support the Smart Storage Battery.
Intelligent PDU details 297
To Next Page
Loading...
Need help?
General