Confirming registration is complete (iLO web interface)
Procedure
1. Click Remote Support in the navigation tree.
The Registration page is displayed.
2. Select the Confirm that you have completed the HPE Connected Products registration process
check box, and then click Apply.
iLO notifies you that the registration process is finished.
Completing the optional post-registration steps
Procedure
1. Optional: Send a test event to confirm the connection between iLO and HPE remote support.
2. Optional: To receive email alerts about system events, configure AlertMail.
Editing the web proxy settings (Insight Online direct connect only)
If the web proxy settings change after a server is registered for remote support, update the settings to
enable the server to continue sending data to Hewlett Packard Enterprise.
Procedure
1. Click Remote Support in the navigation tree.
The Registration page is displayed.
2. Update the following settings, as needed:
• Web Proxy Server—Enter the hostname or IP address.
• Web Proxy Port
• Web Proxy Username
• Web Proxy Password
3. Click Apply.
Registering for Insight Remote Support central connect
Prerequisites
• Your environment meets the prerequisites for embedded remote support registration.
• Configure iLO Settings privilege.
Procedure
1. Click Remote Support in the navigation tree.
Confirming registration is complete (iLO web interface) 191
To Next Page
Loading...
Need help?
General