• To filter by severity, select a severity level from the Severity list.
• To filter by class, select a class from the Class list.
• To filter by event category, select a value in the Category list.
• To change the displayed date and time for events, select a value in the Time menu. Choose from the
following:
◦ Show Default—Display UTC time.
◦ Show Local Time—Display the iLO web interface client time.
◦ Show ISO Time—Display UTC time in ISO 8601 format.
• To filter by the Last Update date, select a value in the Last Update menu.
• To set the filters back to the default values, click Reset filters.
Searching for an event
To search for events based on dates, event IDs, or description text, click , and then enter text in the
search box.
Marking an IML entry as repaired
Use this feature to change the status of an IML entry from Critical or Caution to Repaired.
Prerequisites
Configure iLO Settings privilege
Procedure
1. Investigate and repair the issue.
2. Click Information in the navigation tree, and then click the Integrated Management Log tab.
3. Select the log entry.
To select an IML entry, click the check box next to the entry in the first column of the IML table. If a
check box is not displayed next to an IML entry, that entry cannot be marked as repaired.
4. Click .
The iLO web interface refreshes, and the selected log entry status changes to Repaired.
Adding a maintenance note to the IML
Use maintenance notes to create log entries about maintenance activities such as upgrades, system
backups, periodic system maintenance, or software installations.
Prerequisites
Configure iLO Settings privilege
44 Marking an IML entry as repaired
To Next Page
Loading...
Need help?
General