RIBCL over HTTP/HTTPS, RIBCL through in-band communication, and RIBCL through the OA port
do not work when this feature is disabled.
This option must be enabled when you register a server for Insight Remote Support central connect or
Remote Support from HPE OneView.
The following message is displayed if you try to use RIBCL when it is disabled:
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x00FC"
MESSAGE='RIBCL is disabled.'
/>
</RIBCL>
iLO ROM-Based Setup Utility
Enables or disables the iLO configuration options in the UEFI System Utilities.
When this setting is enabled (default), the iLO configuration options are available when you access
the UEFI System Utilities.
When this setting is disabled, the iLO configuration options are not available when you access the
UEFI System Utilities.
This setting cannot be enabled if option ROM prompting is disabled in the system BIOS.
This option is called iLO 5 Configuration Utility in the UEFI System Utilities.
Require Login for iLO 5 RBSU
Determines whether a user credential prompt is displayed when a user accesses the iLO
configuration options in the UEFI System Utilities.
When this setting is disabled (default), login is not required when a user accesses the iLO
configuration options in the UEFI System Utilities.
When this setting is enabled, a login dialog box opens when a user accesses the iLO configuration
options in the UEFI System Utilities.
When the FIPS and SuiteB security states are enabled, iLO displays a user credential prompt even if
this option is disabled.
This option is called Require user login and configuration privilege for iLO 5 Configuration in the
UEFI System Utilities.
Show iLO IP during POST
Enables the display of the iLO network IP address during host server POST.
When this setting is enabled (default), the iLO IP address is displayed during POST.
When this setting is disabled, the iLO IP address is not displayed during POST.
Virtual Serial Port Log
Enables or disables logging of the Virtual Serial Port.
When this setting is enabled, Virtual Serial Port activity is logged to a 150-page circular buffer in the
iLO memory. Use the CLI command vsp log to view the logged information. The Virtual Serial Port
buffer size is 128 KB.
When this setting is disabled (default), Virtual Serial Port activity is not logged.
230 Using the iLO security features
To Next Page
Loading...
Need help?
General