associated hardware has a failure, the top-level controller status changes to Major Warning or
Degraded, depending on the failure type. If the controller hardware has a Failed status, the top-level
controller status is Failed.
• Controller Status—Controller hardware status (OK or Failed)
• Serial Number
• Model
• Firmware Version
• Controller Type
Physical Drives
This section provides information about physical drives attached to Hewlett Packard Enterprise and third-
party storage controllers.
When a physical drive has a Failed status, this status does not affect the overall storage health status.
Only logical drives affect the storage health status.
• Physical drive location
• Status
• Serial Number
• Model
• Media Type
• Capacity
• Location
• Firmware Version
• Drive Configuration
• Encryption Status
Viewing general system information 67
To Next Page
Loading...
Need help?
General