iLO Federation group memberships for a set of iLO systems
When you add group memberships for multiple iLO systems at one time, you specify the privileges that
members of the group have for configuring the other members of the group.
For example, if you configure group2 based on the DEFAULT group, and you assign the Virtual Power
and Reset privilege, the users of iLO systems in group2 can change the power state of all the servers in
the group.
You can add group memberships for multiple iLO systems on the Group Configuration page.
You can perform the following tasks for a group of iLO systems:
• Create a group with the same members as an existing group, but with different privileges.
• Create a group with members that you select by using the iLO Federation filters.
iLO Federation group privileges
When an iLO system is added to a group, the group can be granted the following privileges:
• Login— Group members can log in to iLO.
• Remote Console—Group members can remotely access the managed server Remote Console,
including video, keyboard, and mouse control.
• Virtual Power and Reset—Group members can power-cycle or reset the host system. These
activities interrupt the system availability.
• Virtual Media—Group members can use scripted Virtual Media with the managed server.
• Host BIOS—Group members can configure the host BIOS settings by using the UEFI System
Utilities.
• Configure iLO Settings—Group members can configure most iLO settings, including security
settings, and can remotely update firmware.
• Administer User Accounts—Group members can add, edit, and delete iLO user accounts.
• Host NIC—Group members can configure the host NIC settings.
• Host Storage—Group members can configure the host storage settings.
• Recovery Set—Group members can manage the recovery install set.
This privilege is not available if you start a session when the system maintenance switch is set to
disable iLO security.
iLO Federation group characteristics
• All iLO systems are automatically added to the DEFAULT group, which is granted the Login privilege
for each group member. You can edit or delete the DEFAULT group membership.
• iLO Federation groups can overlap, span racks and data centers, and can be used to create
management domains.
• An iLO system can be a member of up to 10 iLO Federation groups.
86 iLO Federation group memberships for a set of iLO systems
To Next Page
Loading...
Need help?
General