HPE FlexNetwork 5510 HI Series Fundamentals Configuration Guide

135
[System] header shell %Have a nice day.%
•
Multiline banner.
A multiline banner can be up to 2000 characters. To input a multiline banner, use one of the
following methods:
 Method 1—Press Enter after the last command keyword. At the system prompt, enter the
banner and end the last line with the delimiter character %. For example, you can configure
the banner "Have a nice day. Please input the password." as follows:
<System> system-view
[System] header shell
Please input banner content, and quit with the character '%'.
Have a nice day.
Please input the password.%
 Method 2—After you type the last command keyword, type any single printable character
as the start delimiter for the banner and press Enter. At the system prompt, type the banner
and end the last line with the same delimiter. For example, you can configure the banner
"Have a nice day. Please input the password." as follows:
<System> system-view
[System] header shell A
Please input banner content, and quit with the character 'A'.
Have a nice day.
Please input the password.A
 Method 3—After you type the last command keyword, type the start delimiter and part of
the banner and press Enter. At the system prompt, enter the rest of the banner and end the
last line with the same delimiter. For example, you can configure the banner "Have a nice
day. Please input the password." as follows:
<System> system-view
[System] header shell AHave a nice day.
Please input banner content, and quit with the character 'A'.
Please input the password.
A
Configuration procedure
To configure banners:
Step
Command
Remarks
1. Enter system view.
system-view
N/A
2. Configure the legal banner.
header legal
text
By default, the device does not have a
banner.
3. Configure the MOTD banner.
header motd
text
By default, the device does not have a
banner.
4. Configure the login banner.
header login
text
By default, the device does not have a
banner.
5. Configure
the incoming
banner.
header incoming
text
By default, the device does not have a
banner.
6. Configure the shell banner.
header shell
text
By default, the device does not have a
banner.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English